Single-use storage assemblies are designed for fluid mixing, handling, storage, and transportation. They are available in multiple sizes, from 50 ml to 2000 ml, and in a variety of configurations to suit your process application
The single-use system is a process equipment solution. Compared with the traditional stainless steel system, it has the advantages of a lower initial cost, no cleaning, and speeding up the development and production progress. At present, it has been widely used in the field of biopharmaceuticals, such as vaccines, antibodies, gene and cell therapies, etc., in all processes from cell culture to preparation and filling.
APPL’s ImaLOK™ sanitary clamp is designed to address the needs of the single-use disposable / bio-pharma industries. ImaLOK™ sanitary clamps are manufactured using a glass-reinforced,
Ami Polymer Pvt. Ltd. ImaLINK™ manifold is designed to minimize the need for fittings, connections, or assembly of all leak points and entrapment areas have been eliminated. Single use ImaLINK™ manifolds are manufactured by moulding straight sections of tubing or with connectors such as T’s, Y’s, X's, and Tri-Clamps. Most molded connectors provide a seamless transition for a continuous, unrestricted, leak-proof flow by eliminating barbed fittings
Ami polymer private limited offers wide range of gamma irradiated single use assemblies for various critical applications
Clean Room Molded PP Y- connector is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry.
Clean Room Molded PP T- connector is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry.
Clean Room Molded PP Straight connector is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry.
Clean Room Molded PP Reducer is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry.
Clean Room Molded PP Cross- connector is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry.
Clean Room Molded PP End Cap is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry.
A liner is essentially an open top bag meant to be placed inside a tank or containment vessel. A liner can be non-gusseted or gusseted. A non-gusseted liner welds two faces together on the sides and bottom while a gusseted liner will have extra support. APPL can produce both gusseted and non-gusseted liners.
Clean Room Molded PP End Plug is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry.
